ĐẦU CỐT- ỐNG NỐI

AUS Copper Cable Lug

Material: E-Cu

Surface : Tin-plated mini 8 microns

Product Property: It is used to connect the cop r conductor end.Application up to 33kV. It is in accordance with DIN46235. And its type test is in accordance with IEC 61238-1.

Technical Parameters

Type No	Main Dimensions
	d	L	<i>
AUS6-5	3.8	24	5.3
AUS6-6	4.5	24	6.4
AUS10-5	5.5	27	5.3
AUS10-6	5.5	27	6.4
AUS16-6	5.5	36	6.4
AUS16-8	5.5	36	8.4
AUS16-10	5.5	36	10.5
AUS16-12	5.5	36	13
AUS25-6	7.0	38	6.4
AUS25-8	7.0	38	8.4
AUS25-10	7.0	38	10.5
AUS25-12	7.0	38	13
AUS35-8	12.5	42	8.4
AUS35-10	12.5	42	10.5
AUS35-12	12.5	42	13
AUS50-8	10	52	8.4
AUS50-10	10	52	10.5
AUS50-12	10	52	13
AUS50-16	10	52	17
AUS70-8	11.5	55	8.4
AUS70-10	11.5	55	10.5
AUS70-12	11.5	55	13
AUS70-16	11.5	55	17
AUS95-10	13.5	65	10.5
AUS95-12	13.5	65	13

 

Type No	Main Dimensions
	d	L	4>
AUS95-16	13.5	65	17
AUS120-10	15.5	70	10.5
AUS120-12	15.5	70	13
AUS120-16	15.5	70	17
AUS120-20	15.5	70	21
AUS150-10	17	78	10.5
AUS150-12	17	78	13
AUS150-16	17	78	17
AUS150-20	17	78	21
AUS185-10	19	82	10.5
AUS185-12	19	82	13
AUS185-16	19	82	17
AUS185-20	19	82	21
AUS240-12	21.5	92	13
AUS240-16	21.5	92	17
AUS240-20	21.5	92	21
AUS300-16	24.5	100	17
AUS300-20	24.5	100	21
AUS400-16	27.5	115	17
AUS400-20	27.5	115	21
AUS500-20	31	125	21
AUS630-20	34.5	135	21
AUS800-20	40	165	21
AUS1000-20	44	165	21

 

JGY Copper Cable Lug

Material: E-Cu

Surface

Technical Parameters treatment: Tin-plated
Product Property: It Is used to connect the copper conductor end. It has a viewing window to check the conductor location

Type No	Main Dimensions
	d	L	<l>
JGY6-5	3.7	25	5.2
JGY6-6	3.7	25	6.5
JGY6-8	3.7	25	8.4
JGY6-10	3.7	25	10.3
JGY10-6	4.5	26	6.5
JGY10-8	4.5	26	8.4
JGY10-10	4.5	28	10.3
JGY16-6	5.7	28.5	6.5
JGY16-8	5.7	28.5	8.4
JGY16-10	5.7	28.5	10.3
JGY25-6	7.2	35	6.5
JGY25-8	7.2	35	8.4
JGY25-10	7.2	35	10.3
JGY25-12	7.2	37	12.5
JGY35-6	8.5	37.5	6.5
JGY35-8	8.5	37.5	8.5
JGY35-10	8.5	37.5	10.5
JGY35-12	8.5	39	12.5
JGY50-6	9.8	43.5	6.5
JGY50-8	9.8	43.5	8.5
JGY50-10	9.8	43.5	10.5
JGY50-12	9.8	43.5	13
JGY70-8	11.5	50	8.5
JGY70-10	11.5	50	10.5
JGY70-12	11.5	50	13
JGY95-8	13.7	58.5	8.5
JGY95-10	13.7	58.5	10.5
JGY95-12	13.7	58.5	13
JGY95-14	13.7	58.5	14.7
JGY95-16	13.7	58.5	17
JGY120-10	15	63.5	10.5
JGY120-12	15	63.5	13
JGY120-14	15	63.5	14.7
JGY120-16	15	63.5	17
JGY120-20	15	68	21
JGY150-10	16.7	73	10.5
JGY150-12	16.7	73	13

	d	L	<t>
JGY150-14	16.7	73	15
JGY150-16	16.7	73	17
JGY150-20	16.7	76	21
JGY185-10	18.5	80	10.5
JGY185-12	18.5	80	13
JGY185-14	18.5	80	14.7
JGY185-16	18.5	80	17
JGY185-18	18.5	80	18.7
JGY185-20	18.5	80	21
JGY240-12	21	92.5	13
JGY240-14	21	92.5	14.7
JGY240-16	21	92.5	17
JGY240-18	21	92.5	18.7
JGY240-20	21	92.5	21
JGY300-10	24	102	10.5
JGY300-12	24	102	13
JGY300-14	24	102	14.7
JGY300-16	24	102	17
JGY300-18	24	102	18.7
JGY300-20	24	102	21
JGY400-12	27	114	13
JGY400-14	27	114	14.7
JGY400-16	27	114	17
JGY400-18	27	114	18.7
JGY400-20	27	114	21
JGY500-16	30	127	17
JGY500-18	30	127	18.7
JGY500-20	30	127	21
JGY630-16	35	140	17
JGY630-18	35	140	18.7
JGY630-20	35	140	21
JGY630-22	35	140	23
JGY800-20	39	170	21
JGY800-22	39	170	23
JGY1000-20	44	200	21
JGY1000-22	44	200	23

 

JGA Copper Cable Lug

Material: E-Cu

Surface treatment: Tin-plated
Product Property: It is used to connect the copper conductor end.

Technical Parameters

Type No	Main Dimensions
	D	L	<i>
JGA6-5	3.7	25	52
JGA6-6	3.7	25	6.5
JGA6-8	3.7	25	8.4
JGA6-10	3.3	25	10.3
JGA10-6	4.5	26	6.5
JGA10-8	4.5	26	8.4
JGA10-10	4.5	28	10.3
JGA16-6	5.7	28.5	6.5
JGA16-8	5.7	28.5	8.4
JGA16-10	5.7	28.5	10.3
JGA25-6	7.2	35	6.5
JGA25-8	7.2	35	8.4
JGA25-10	7.2	35	10.3
JGA25-12	7.2	37	12.5
JGA35-6	8.5	37.5	6.5
JGA35-8	8.5	37.5	8.5
JGA35-10	8.5	37.5	10.5
JGA35-12	8.5	39	12.5
JGA50-6	8.5	43.5	6.5
JGA50-8	9.8	43.5	8.5
JGA50-10	9.8	43.5	10.5
JGA50-12	9.8	43.5	13
JGA70-8	11.5	50	8.5
JGA70-10	11.5	50	10.5
JGA70-12	11.5	50	13
JGA95-8	13.7	58.5	8.5
JGA95-10	13.7	58.5	10.5
JGA95-12	13.7	58.5	13
JGA95-14	13.7	58.5	14.7
JGA95-16	13.7	58.5	17
JGA120-10	15	63.5	10.5
JGA120-12	15	63.5	13
JGA120-14	15	63.5	14.7
JGA120-16	15	63.5	17
JGA120-20	15	68	21
JGA150-10	16.7	73	10.5
JGA150-12	16.7	73	13

Type No	Main Dimensions
	D	L	<t>
JGA150-14	16.7	73	15
JGA150-16	16.7	73	17
JGA150-20	16.7	76	21
JGA185-10	18.5	80	10.5
JGA185-12	18.5	80	13
JGA185-14	18.5	80	14.7
JGA185-16	18.5	80	17
JGA185-18	18.5	80	18.7
JGA185-20	18.5	80	21
JGA240-12	21	92.5	13
JGA240-14	21	92.5	14.7
JGA240-16	21	92.5	17
JGA240-18	21	92.5	18.7
JGA240-20	21	92.5	21
JGA300-10	24	102	10.5
JGA300-12	24	102	13
JGA300-14	24	102	14.7
JGA300-16	24	102	17
JGA300-18	24	102	18.7
JGA300-20	24	102	21
JGA400-12	27	114	13
JGA400-14	27	114	14.7
JGA400-16	27	114	17
JGA400-18	27	114	18.7
JGA400-20	27	114	21
JGA500-16	30.0	127	17
JGA500-18	30.0	127	18.7
JGA500-20	30.0	127	21
JGA630-16	35.0	140	17
JGA630-18	35.0	140	18.7
JGA630-20	35.0	140	21
JGA630-22	35.0	140	23
JGA800-20	39	170	21
JGA800-22	39	170	23
JGA1000-20	44	200	21
JGA1000-22	44	200	23

 

DTGA Copper Cable Lug

Technical Requirements                                                                    Notes

It Is suitable for the connection of copper

conductors in low voltage.                                                                The products has passed cUL Certificate

They are manufactured of copper tube 99.9% purity and tin

 

 

Technical Parameters

Item No.	Applicable	Dimensions (mm)					Note	Item No.	Applicable	Dimensions (mm)
	Bolts	D	d	L2	L1	<t>			Bolts	D	d	L2	L1	*
DTGA-2.5	m4,m6	4	2.4	23	7	6.6		DTGA-120	m10.	19	16	$4	28	12.6
DTGA-4		4.8	3.1	24	9	5.5		DTGA-150	m12,m16	21	17	74	30	14.5
DTGA-6	m5,m6,m8,	5.5	3.8	27	Q	5.5	(1)
								DTGA-185		23.5	19	80	34	14.5
DTGA-10	m10,m12	7	5	30	11	6.5	Can be		m8,m100
DTGA-16	m6,m8,m10	8	6	30.5	12	8.5	produced according to	DTGA-240	m16,m20	26	21	93	40	17
DTGA-25	m6,m8 m10,m12	9	7	35.5	16	8.5		DTGA-300	m16,m20	29	23	102	46	17
DTGA-35		11	9	44	18	6.5	customer’s	DTGA-400	m16,m20	32	26	107	46	17
DTGA-50		12.5	10	47	20	10.6	drawings
								DTGA-500	m16,m20	36	29	125	48	17
DTGA-70	m8,m10,	15	12	53	23	10.5
DTGA-95	m12,m16	17	14	57	24	12.5		DTGA-630	m16,m20	42	34	155	60	17

DLAIuminum Cable Lug

Technical Requirements

Material: AL-99.5%

Surface treatment: Bright

Products property: It is used to connect the aluminum conductor end

 

Type No	Main Dimensions (mm)
	4>	D	d	L	L1	A
DL-10	8.4	9	5	64	29	16
DL-16	8.4	10	5.5	70	32	16
DL-25	8.4	12	7	75	34	18
DL-35	10.5	14	8.5	85	40	20
DL-50	10.5	16	9.5	90	42	23
DL-70	12.5	18	12	102	47	26
DL-95	12.5	21	13	112	50	28
DL-120	14.5	23	15	120	53	30

Type No	Main Dimensions (mm)
		D	d	L	L1	A
DL-150	14.5	25	16	126	55	34
DL-185	16.5	27	18	133	58	37
DL-240	16.5	30	20	140	60	40
DL-300	21	34	23	165	65	45
DL-400	21	38	26	170	70	52
DL-500	21	42	29	190	75	60
DL-630	–	54	34	225	80	78
DL-800	–	60	38	270	90	100

 

DT Copper Cable Lug

Technical Requirements

1 Material: E-Copper,Good conductivity

2 The marking should be clearly,well-proportioned

3 Closed angle and edge curl is not allowed at the mouth of the pipe

4 Acid-cleaning surface(or tin plated)

Technical Parameters

Type No .	Main Dimensions (mm)
	D	d	L	u	A	<l>
DT-10	9	5.5	66	30	16	8.4
DT-16	10	6	67	31	16	8.4
DT-25	11	7	70	34	18	8.4
DT-35	12	8.5	79	36	20	10.5
DT-50	14	9.6	87	40	23	10.5
DT-70	16	12	95	44	26	12.5
DT-95	18	13	105	47	28	12.5
DT-120	20	15	112	50	30	14.5

Type No .	Main Dimensions (mm)
	D	d	L	L,	A	4>
DT-150	22	16	118	54	34	14.5
DT-185	25	18	125	56	38	16.5
DT-240	27	20	136	60	42	16.5
DT-300	30	23	160	65	48	21
DT-400	34	26	165	70	54	21
DT-500	38	29	190	75	64	21
DT-630	45	34	220	85	78	–
DT-800	50	38	257	85	100	–

DTL Bimetallic Lug

Technical Requirements

1. The product should be accordence with the technic specifications of Q/GLF 01 -2006.
2. The transition section between aluminum and copper is produced through friction welding.
3. Mark shall be clear.
4. There is no burrs and curling.
5. Surface shall be acid-cleaning.

   

   

   

    

   Technical Parameters

   Type No .	Main Dimensions (mm)
   	<t>	D	d	L	L,	A
   DTL-10	8.4	10	5	64	29	16
   DTL-16	8.4	10	5.5	70	32	16
   DTL-25	8.4	12	7	75	34	18
   DTL-35	10.5	14	8.5	85	40	20
   DTL-50	10.5	16	9.5	90	42	23
   DTL-70	12.5	18	12	102	47	26
   DTL-95	12.5	21	13	112	50	28
   DTL-120	14.5	23	15	120	53	30

   Type No .	Main Dimensions (mm)
   	<l>	D	d	L	L,	A
   DTL-150	14.5	25	16	126	55	34
   DTL-185	16.5	27	18	133	58	37
   DTL-240	16.5	30	20	140	60	40
   DTL-300	21	34	23	165	65	45
   DTL-400	21	38	26	170	70	52
   DTL-500	21	42	29	190	75	60
   DTL-630	–	54	34	245	80	78
   DTL-800	–	60	38	270	90	100

   CAL-A Bimetallic Lug

   Material:E-Cu; AI-99.6%

   Technical Requirements

   1. Due to the coupling effect when Aluminum comes in contact with copper,corrosion will happen in the short time.The best solution Is to use aluminum-copper bi-metal connectors.lt Is according with IEC 61238-1.
   2. The transition section between aluminum and copper is produced by friction welding,bending 180 ,no breaking weld
   3. The marking should be clearly,well-proportioned with the depth of 3mm
   4. Closed angle and edge curl are not allowed at the mouth of the pipe.
   5. Acld-clearlng surface

   

   

    

   Technical Parameters

   Type No	Main Dimensions (mm)
   	4>	D	d	L	L,
   CAL-16A	h	16	5.5	83	42
   CAL-25A	h	16	6.5	83	42
   CAL-35A	h	16	8	83	42
   CAL-50A	13	20	9	90	43
   CAL-70A	13	20	11	90	43
   CAL-95A	13	20	12.5	90	43

   Type No	Main Dimensions (mm)
   	4>	D	d	L	L
   CAL-120A	13	25	13.5	115	60
   CAL-150A	13	25	15.5	115	60
   CAL-185A	13	32	17.5	125	60
   CAL-240A	13	32	19.5	125	60
   CAL-300A	13	34	22.5	135	62

   CAL-B Bimetallic Lug

   Material:E-Cu; AI-99.6%

   Technical Requirements

   1.Due to the coupling effect when Aluminum comes in contact with copper corrosion will happen In the short time.The best solution is to use aluminum-copper bi-metal connectors.lt Is according with IEC 61238-1
   2. The transition section between aluminum and copper is produced by friction welding,bending 180° ,no breaking weld
   3.The marking should be clearly,well-proportioned with the depth of 3mm;
   4.Closed angle and edge curl are not allowed at the mouth of the pipe.
   5.Acid-clearing surface.
   Note: copper palm for CAL-500B & CAL-630B is square

 

 

 

Technical Parameters

	D	d	L	L,	A	<J>
CAL-16B	16	5.5	85	43	21	10.5
CAL-25B	16	6.5	85	43	21	10.5
CAL-35B	16	8.0	85	43	21	10.5
CAL-50B	20	9.0	90	43	25.6	12.8
CAL-70B	20	11.0	90	43	26.5	12.8
CAL-95B	20	12.5	90	43	26.5	12.8
CAL-120B	25	13.7	115	59	26.5	12.8

Type No	Main Dimensions (mm)						Note
	D	d	L	L,	A	<t>
CAL-150B	25	15.5	115	59	30	12.8	FIG. 1
CAL-185B	32	17.0	115	59	30	12.8
CAL-240B	32	19.5	115	59	30	12.8
CAL-300B	40	23.3	160	93	35	16.5
CAL-400B	40	26.0	160	93	35	16.5
CAL-500B	47	29.1	200	94	10X60X60	16.5	FIG.2
CAL-630B	47	32.5	200	94	10X60X60	16.5

ATL Bimetallic Lug

Material:E-Cu; AI-99.6%

Technical Requirements

1. Due to the coupling ef

   

   

   fect when Aluminum comes in contact with copper,corrosion will happen in the short time.The best solution Is to use aluminum-copper bi-metal connectors.lt Is according with IEC 61238-
   2.The transition section between aluminum and copper is produced through riveting methods
   3Coatedwith plastic resin at the cylindrical copper

   4.Surface shall be aid-washing

   Type No	Main Dimensions
   	D	L
   ATL10-6	5.0	63	6.5
   ATL10-8	5.0	63	8.5
   ATL16-8	5.8	63	8.5
   ATL16-10	5.8	65	10.5
   ATL25-8	6.8	71	8.5
   ATL25-10	6.8	73	10.5
   ATL25-12	6.8	73	13.0
   ATL35-8	8.0	79	8.5
   ATL35-10	8.0	80	10.5
   ATL35-12	8.0	52.5	13.0
   ATL50-8	9.8	84.5	8.5
   ATL50-10	9.8	86	10.5
   ATL50-12	9.8	87.5	13.0
   ATL70-8	11.2	98.5	8.5
   ATL70-10	11.2	100	10.5
   ATL70-12	11.2	102.5	13.0
   ATL95-10	13.2	106.5	10.5
   ATL95-12	13.2	106.5	13.0

   Type No	Main Dimensions
   	D	L	*
   ATL95-16	13.2	108.5	17.0
   ATL120-10	14.7	107.5	10.5
   ATL120-12	14.7	107.5	13.0
   ATL120-16	14.7	109.5	17.0
   ATL150-10	16.3	119	10.5
   ATL150-12	16.3	119	13.0
   ATL150-16	16.3	121.5	17.0
   ATL150-20	16.3	123	21.0
   ATL185-12	18.3	123.5	13.0
   ATL185-16	18.3	124.5	17.0
   ATL185-20	18.3	126	21.0
   ATL240-12	21.0	130	13.0
   ATL240-16	21.0	130	17.0
   ATL240-20	21.0	130	21.0
   ATL300-16	23.15	130	17.0
   ATL300-20	23.15	130	21.0
   ATL400-16	26.0	200	17.0
   ATL400-20	26.0	200	21.0

   Copper And Aluminum Bolt-type Terminal

   

   WCJG-H	WCJG-T	WCJE	WCJG-T
   10-50	10-50	10-50	12mm, 14mm
   25-120	25-120	16-95	16mm, 18mm

   Copper Aluminum Ferrule Connecter

   Technical Requirements

   1. The product should be accordence with the technic specifications of Q/GLF 0030-2011
   2.friction weldingg technologi
   3.Pickling surface of the product

   

   

   Technical Parameters

   Type no	Main Dimensions
   	D1	d1	L1	d2	d2	L2	L
   GTL-10	10,5	5,3	30	8	4,2	25	70
   GTL-16	11	6,3	32	9	5,3	28	75
   GTL-25	12	7,3	36	10	6,0	29	80
   GTL-35	14	8,5	42	11	7,0	29	85
   GTL-50	16	9,8	47	13	8,5	31	90
   GTL-70	18	11,5	50	15	9,8	33	100
   GTL-95	21	13,5	52	17	11,5	38	110
   GTL-120	23	15,0	55	19	13,5	40	110

   Type no	Main Dimensions
   	D1	d1	L1	D2	d2	L2	L
   GTL-150	25	16,5	56	21	15	44	115
   GTL-185	27	18,5	58	23	16,5	45	125
   GTL-240	30	21,0	62	26	18,5	48	130
   GTL-300	34	24,0	65	29	21,0	51	145
   GTL-400	38	27,0	70	30	24,0	60	155
   GTL-500	42	29,0	75	34	27,0	65	165
   GTL-630	54	34,0	80	38	29,0	70	180

   Copper Aluminum Connecting Tube

   Technical Requirements

   1,The product should be accordence with the technic specifications of Q/GLF 0032-2010.

   2, Coated with tin.

   

   

    

 

 

 

Type No	Main Dimensions (mm)
	D	d	L
GTY-1.5	3.7	1.8	20
GTY-2.5	4	2.5	20
GTY-4	4.8	3.1	20
GTY-5.5	5.5	3.8	25
GTY-10	6.8	4.8	30
GTY-16	7.5	5.5	35
GTY-25	9	7	40
GTY-35	10.5	8.2	45
GTY-50	12.5	9.8	50
GTY-70	14.5	11.5	55
GTY-95	17.5	13.5	60

Type No	Main Dimensions (mm)
	D	d	L
GTY-120	19.5	15	65
GTY-150	21	16.5	70
GTY-185	23.5	18.5	75
GTY-240	26.5	21	80
GTY-300	30	24	85
GTY-400	34	27	90
GTY-500	38	30	100
GTY-630	45	35	110
GTY-800	50	39	150
GTY-1000	56	44	170

Aluminum Connector

Material: Aluminum content=99.5%

Application: Suitable for all kinds of circular distribution equipment,semi-circular fan-shaped wire and power cable connection

Feature: Clamp pressure mark on surface, Internal tube coated conductive paste(Antioxidant of chemical mixtures), Both ends sealed with rubber cover

Approve: The product should be accordance with the test standard of GB9327. IEC61238-1.

 

 

 

 

Technical Parameters

Type No	Main Dimensions (mm)
	L	d
GLM-25	90.5	90.5
GLM-70	106.5	106.5
GLM-95	106.5	106.5
GLM-120	133	133
GLM-150	133	133

Type No	Main Dimensions (mm)
	L	d
GLM-185	143.5	17
GLM-240	143.5	19.5
GLM-300	218	23.3
GLM-400	218	26
GLM-500	218.5	29.1

Bolt-type Lug & Aluminum Bolt Connector

Technical Requirements

Material: Al-Alloy

Product property: It use spanner instead of hydraulic tool to finish installation.The special eccentric design for round conductor ensures enough anti-wrench strength and conductivity. The bolts and nuts are specially designed to install on large range of conductors.When installing,you can choose the suitable end and tighten it until it breaks. The barrel capped is filled with joint compound to avoid oxidization.and its type test is in accordance with IEC61238-1.

Features:Friction welding grease filled,the end of product shall be placed rubber seal.

Material: Al-Alloy

Surface: Coated with tin=15um.

Application: Suitable for all kinds of circular distribution equipment, semi-circular fan-shaped wire and power cable connection.

Feature: Relative to the Crimped connections, Bolt-type connections have more technical and usability advantage. In dealing with large cross- section cable, this clamping technique is just the perfect complement to the requirements of a variety of new cable accessories, installation takes only a simple tool. Internal tube coated conductive paste(Antioxidant of chemical mixtures), Both ends sealed with rubber cover.

Approve: The product should be accordance with the test standard of GB9327, IEC61238-1.